How To Clean Work Boots Inside?

Cleaning your work boots is essential to keeping them in good condition. If you use a boot, it is critical to understand the right cleaning techniques to maintain them. Not only will this keep your boots looking good and extend their lifespan, but it will also help protect your feet from bacteria and fungi. In this article, we will show you how to clean your work boots inside correctly using a few simple steps. Let’s get started!

how to clean work boots inside
how to clean work boots inside

Let’s discuss how to clean work boots inside

There are a few different ways that you can clean the inside of your work boots, depending on how dirty they are. Some effective strategies are listed below.

How to clean work boots inside by hand

If your work boots are starting to stink, it is about time that you should clean them. Here’s how one can clean the inside work boots by hand:

What do you need?

  • A brush
  • A basin or bucket
  • Water
  • Mild soap
  • Baking soda (optional)


Step 1: Gather your supplies:

First, you’ll need a few supplies. These Supplies include a brush, a basin or bucket, some water, a little bit of mild soap, and baking soda (optional). When you have all of these supplies, you would be ready to start the cleaning process. But before you proceed, make sure to look for any tears or holes in your work boots. If there are any, you’ll want to patch them up before you start cleaning.

Step 2: Take off the laces and pull out the insoles:

Take the laces off your work boots. You can either clean them separately or wait it out and clean them with the rest of the boot. Once the laces are removed, proceed to remove the insole from the boot. This will make it easier to reach inside the boots and give them a thorough cleaning.

Step 3: Put soap and water in the bucket:

Add some mild soap to a half-filled bucket of water. Add just enough soap, so that it makes some suds will do. Once you’ve added the soap, stir it so the suds start to form.

Step 4: Scrub the inside of the boot:

It’s time for you to get scrubbing. Soak the brush in a soapy solution and scrub off the dirt on the inside of the boots. Focus on areas that seem extra dirty or smelly. If your boot still smells bad after the scrub, you can use some baking soda. Baking soda is a perfect counter to remove any unpleasant smell from your boots.

Step 5: Rinse the boots:

Once you’ve scrubbed the boots, it’s time to rinse them off. Pull them out from the soapy water and hold them under the running water. Make sure to thoroughly rinse the soap from the boots. You can use your brush to help remove any stubborn soap residue.

Step 6: Apply the same steps to the second boot:

Repeat the same process with the other boot. Once you’ve finished scrubbing and rinsing both boots, you can move on to the next step.

Step 7: Let the boots air dry:

Now that your boots are clean, it’s time to let them air dry. You can either let them sit out in the open air or place them in front of a fan. Ensure that the boots are thoroughly dry before reattaching the laces and wearing the boots again.

This is it! You now know how to manually clean the insides of your work boots. This technique is a great way to get rid of any dirt, filth, and salt accumulation. Plus, it’s a simple way to keep your boots smelling fresh and looking their best. Next time you need to clean your work boots, remember to give this method a try yourself.

How to clean inside work boots inside by washing machine

If your work boots are starting to smell bad, or if they’re just getting a bit too dirty for your liking, you can also clean them in the washing machine. Here’s how:

What do you need?

  • Washing machine
  • Laundry detergent
  • Old toothbrush (optional)
  • Water


Step 1: Gather your supplies:

First, you’ll need to gather your supplies. You’ll need a washing machine, laundry detergent, an old toothbrush (optional), and water. The type of washing machine doesn’t matter, although a top-loading machine will be easier to use. Also, remember to remove all objects from inside the machine that may damage the boot during the wash. And if you’re using a front-loading machine, be sure to put your boots in a mesh laundry bag to protect them.

Step 2: Remove the laces and insole:

Before you put your boots in the machine, you’ll need to remove the laces and insole. The laces can go in with the rest of your laundry, but the insole should be washed separately by hand or in the sink.

Step 3: Brush away any dirt:

If there’s any visible dirt on your boots, use an old toothbrush (or any brush) to brush it away. This will help loosen up any caked-on dirt so that it doesn’t just redistribute itself during the wash cycle.

Step 4: Add detergent and water:

Add your favorite laundry detergent to the washing machine, along with enough water to cover the boots. You only need a small amount of detergent to complete the task.

Step 5: Wash on a gentle cycle:

Set the washing machine to use cold water and a delicate cycle. You should avoid using hot water since it can harm the suede or synthetic materials in your boots. And you don’t want to use a harsh cycle because it can be too tough on them. A gentle cycle with cold water should be just right for the job.

Step 6: Let them air dry:

Once the cycle is done, remove your boots from the washing machine and allow them to air dry. Don’t use a dryer as they could be ruined by being dried in it. Simply let them dry completely in the open air. And that’s it! Your boots should be clean and ready to wear.

Cleaning your work boots in the washing machine is a quick and easy way to get them clean, without having to do any extra scrubbing by hand. However, you must remove the insole and laces before placing the boots in the washing machine. While the laces and insoles are to be washed separately. Once the cycle is complete, be sure to let the boots air dry. With just a little bit of effort, you can keep your boots looking and smelling fresh all season long.

Best way to dry insides of work boot

If you’re like most people, without much dealing in boots knowledge, likely, you don’t give much consideration to how you dry your boots. Maybe you just leave them out in the sun to air dry, or maybe you toss them in the dryer on low heat. But with just the right way of drying, you can extend the life period of your boots.  Let us guide you on the best way to dry your boot quickly and thoroughly.

Here are a few tips:

1. Remove the liners (if possible) before drying. This will help the boots dry more evenly and prevent the liners from getting too stiff.

2. Don’t put your boots under direct sunlight. The heat is nothing less than an enemy to your boots as it can cause the leather to become fragile and prone to cracking.

3. Use a fan to help your boots dry faster. If you have a ceiling fan, point it in the direction of your boots.

4. Stuff your boots with newspaper to help absorb moisture. Change the newspaper every few hours to ensure that it stays dry.

5. Use a boot drying rack. This is a special rack that helps circulate air around the boots and speeds up the drying process.

Follow these guidelines and you will have dry, comfy work boots in no time!

Tips for increasing the lifetime of your work boots

Wearing the proper footwear is a crucial part of any job. Finding shoes that are durable, slip-resistant, and comfortable is essential to provide your feet with the support they need. Work boots are designed to meet these needs, but they can be expensive. Here are some tips to help you get the most out of your work boots and extend their lifespan.

  • Selecting the perfect pair for the job.

Work boots come in a range of styles, so it’s critical to choose the one that is the best match for your specific job or working environment.  For instance, if you’re working in a slick or rainy environment, you’ll need boots with strong traction and a slip-resistant sole. If you’re working on a construction site or around heavy equipment, you’ll need a boot that offers more protection and support.

  • Break them in gradually.

Once you’ve chosen the right pair of work boots, it’s important to break them in gradually. Wear them for a few hours the first day, and then increase the amount of time you wear them each day until you’re comfortable wearing them for a full shift. This will help keep blisters and other issues from happening.

  • Keep them clean and dry.

Use a moist towel to clean your work boots after each use to get rid of any dirt or debris. Before storing them, let them properly air dry. Use newspaper to help absorb moisture from your boots if they get wet.

  • Store them properly.

The proper way of storing work boots is to keep them in a cold, dry place and out of contact with heat and sunlight. This will help prolong their life.

  • Have them repaired when needed.

Don’t wait until your work boots are falling apart before you have them repaired or replaced. Having them repaired regularly will extend their life and save you money in the long run.

By following these tips, you can help your work boots last longer and keep your feet comfortable and safe while you’re on the job.

Related Questions:

How do you disinfect the inside of work boots?

You can disinfect the inside of your work boots by using a mixture of one part bleach and ten parts water. Allow the mixture to remain for around five minutes before washing it off. You can also use a commercial boot sanitizer to kill any bacteria that may be present.

How do you get the smell out of work boots?

The best way to get the smell out of work boots is to regularly clean them with a mild soap and water solution. You can also try using a boot dryer or powder to absorb moisture and help control odors. Additionally, make sure to rotate your shoes so that they have time to air out between uses. Moreover, you can also use a dehumidifier to keep boots dry in a humid environment.  Last but not least, remember to keep your boots properly stored when not in use, preferably in a cool, dry location.

How do you clean the inside of leather shoes?

You can clean the inside of leather shoes with a soft, dry cloth. If there is dirt or grime on the inside of the shoes, you can use mild soap and water to remove it. Make sure to wash the soap out of the shoes and let them dry before putting them on again. You should also avoid getting the leather wet, as this can damage the shoes. However, in case the shoes do get wet, make sure to dry them completely and quickly before you put them on again.

Can you put work boots in the dryer?

No, you should not put work boots in the dryer. Doing so can damage the boots and shorten their lifespan. If your boots are wet, let them air dry at room temperature.

Can you clean work boots with dish soap?

It’s not a good idea to clean work boots with dish soap because it can damage the waterproofing and cause the leather to deteriorate. You should instead use a boot cleaner or a mild soap specifically designed for cleaning leather.

What’s the best way to clean work boots?

It depends on the type of boots and what they’re made of. For leather boots, you can use a leather cleaner or saddle soap. Warm water and dish soap can be used to clean rubber boots. Simply remember to thoroughly rinse them afterwards.

How often should I clean my work boots?

It depends on how frequently you wear them and the environment you wear them in. For Instance, you should clean them more often, if you work in an unclean or dusty environment. On the other hand, you could get away with cleaning them less often if you only wear them rarely.

What else can I do to keep my work boots in good condition?

You can use a boot spray or waterproofing treatment to help protect them from the elements. Additionally, when not in use, it is preferred that you keep them in a cool, dry location.

Conclusion paragraph:

So, there you have it! How to clean work boots inside. We’ve shown you two methods – one way to do it by hand and one way to do it in the washing machine. Whichever way you choose, make sure you let your boots dry completely before wearing them again. And finally, some tips for increasing the lifetime of your work boots. Follow these simple guidelines and your boots should last a long time.

Ella John

Ella John created with the vision of helping people to find the perfect boots for any occasion. As an expert in the field of footwear, she has created a comprehensive guide to finding the perfect boots. With her BA (Hons) in Footwear Design from De Montfort University, UK, Ella John has been writing about boots for several years. On you can find helpful information about the latest trends, tips for taking care of your boots, and advice on how to choose the right pair. Ella’s mission is to provide her readers with the best possible advice and help make sure that everyone can look their best in a perfect pair of boots. So if you’re looking for the information and inspiration you need to find the perfect boots, look no further than

Similar Posts